Pro-Form PFTL81910.0 Bedienungsanleitung PDF herunterladen (Seite 10)

10. With the help of a second person, hold the con-

sole assembly near the Left Handrail (88).

Connect the Upright Wire (81) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and try

again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY

BECOME DAMAGED WHEN YOU TURN ON

THE POWER. Remove the wire tie from the

Upright Wire.

Console

Assembly

Console

Wire

Tie

Console

Wire

8. Set the console assembly face down on a soft

surface to avoid scratching the console assem-

bly. Remove the two indicated Screws (A). Next,

ift off the Crossbar (93). Discard the two

Screws.

Console

Assembly

9. IMPORTANT: To avoid damaging the

Crossbar (93), do not use power tools and

do not overtighten the #10 x 3/4" Screws (9)

or the #10 x 3/4" Flat Head Screws (112).

Orient the Crossbar (93) as shown. Attach the

Crossbar to the Handrails (87, 88) with two #10

x 3/4" Flat Head Screws (112), two #10 x 3/4"

Screws (9), and two 1/4" Star Washers (35) as

shown. Start all four Screws, and then tighten

each of them.

112

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Keine Kommentare

Pro-Form PFTL81910.0 Bedienungsanleitung Seite 10