Pro-Form 590T Bedienungsanleitung PDF herunterladen (Seite 23)

Most treadmill problems can be solved by following

the simple steps below. Find the symptom that

applies, and follow the steps listed. If further assis-

tance is needed, see the front cover of this manual.

SYMPTOM: The power does not turn on

a. Make sure that the power cord is plugged into a

surge suppressor and that the surge suppressor

is plugged into a properly grounded outlet (see

page 13). Use only a surge suppressor that meets

allofthespecicationsdescribedonpage13.

IMPORTANT: The treadmill is not compatible

with GFCI-equipped outlets and may not be

compatible with AFCI-equipped outlets.

b. After the power cord has been plugged in, make

sure that the key is inserted into the console.

c. Check the power switch located on the treadmill

frame near the power cord. If the switch protrudes

as shown, the switch has tripped. To reset the

powerswitch,waitforveminutesandthenpress

the switch back in.

SYMPTOM: The power turns off during use

a. Check the power switch (see the drawing above).

Iftheswitchhastripped,waitforveminutesand

then press the switch back in.

b. Make sure that the power cord is plugged in. If the

powercordispluggedin,unplugit,waitforve

minutes, and then plug it back in.

c. Remove the key from the console, and then

reinsert it.

d. If the treadmill still will not run, please see the front

cover of this manual.

SYMPTOM: The displays of the console do not

function properly

a. Remove the key from the console and UN-

PLUG THE POWER CORD. Place the

treadmill in the storage position (see

HOW TO FOLD THE TREADMILL on page 22).

Next, remove the two indicated #8 x 3/4" Screws

(6).

TROUBLESHOOTING

Reset

Tripped

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Keine Kommentare

Pro-Form 590T Bedienungsanleitung Seite 23