Pro-Form 635 Bedienungsanleitung PDF herunterladen (Seite 9)

920

HOW TO USE PROGRAMS DIRECTLY FROM

OUR WEB SITE

Our new internet site at www.iFIT.com allows you to

access a selection of programs that interactively con-

trol your treadmill to help you achieve your specific ex-

ercise goals.

To use programs from our internet site, the treadmill

must be connected to your home computer. See HOW

TO CONNECT YOUR COMPUTER on page 17. In

addition, you must have an internet connection and

an internet service provider. A list of specific system

requirements will be found on our internet site.

Follow the steps below to use a program from our

internet site.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 11.

Select the iFIT.com mode.

When the key is in-

serted, the manual

mode will be selected

and the manual indica-

tor will light. To use a

program from our inter-

net site, press the Mode button repeatedly until

the iFIT.com indicator lights.

Go to your computer and start an internet

connection.

Start your web browser, if necessary, and go to

our internet site at www.iFIT.com.

Follow the desired links on our internet site to

select a program.

Read and follow the on-line instructions for using a

program.

Follow the on-line instructions to start the

program.

When you start the program, an on-screen count-

down will begin.

Return to the treadmill and stand on the foot

rails. Find the clip attached to the key and slide

the clip onto the waistband of your clothing.

When the on-screen countdown ends, the program

will begin and the walking belt will begin to move.

Hold the handrails, step onto the walking belt, and

begin walking. During the program, an electronic

“chirping” sound will alert you when the speed

and/or incline of the treadmill is about to change.

CAUTION: Always listen for the “chirp” and be

prepared for speed and/or incline changes.

If the speed or incline settings are too high or too

low, you can manually override the settings at any

time by pressing the Speed or Incline buttons on

the console. However, when the next “chirp” is

heard, the speed and/or incline will change to

the next settings of the program.

To stop the walking belt at any time, press the

Stop button on the console. The Time/Segment

Time display will begin to flash. To restart the pro-

gram, press the Start button or the Speed

▲▲

but-

ton. After a moment, the walking belt will begin to

move at 1.0 mph. When the next “chirp” is

heard, the speed and incline will change to the

next settings of the program.

When the program is completed, the walking belt

will stop and the Time/Segment Time display will

begin to flash. Note: To use another program,

press the Stop button and go to step 5.

Note: If the speed or incline of the treadmill

does not change when a “chirp” is heard, make

sure that the iFIT.com indicator is lit and that

the Time/Segment Time display is not flashing.

In addition, make sure that the audio cable is

properly connected, that it is fully plugged in,

and that it is not wrapped around a power cord.

Follow your progress with the LED track and

the displays.

See step 6 on page 11.

Use the thumb pulse sensor if desired.

Refer to step 7 on page 12.

When the program has ended, remove the key

from the console.

See step 7 on page 14.

THE PERFORMANT LUBE

WALKING BELT

Your treadmill features a walking belt coated with PERFORMANT LUBE

, a high-performance lubricant. IMPOR-

TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such

substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur-

rent to reduce the risk of electric shock. This product is equipped

with a cord having an equipment-earthing conductor and a earthing

plug.

Two power cords are included. Select the one that will fit your

outlet. Refer to drawing 1. Plug the indicated end of the power

cord into the socket on the treadmill. Refer to drawing 2. Plug

the power cord into an appropriate outlet that is properly in-

stalled and earthed in accordance with all local codes and ordi-

nances. Note: In Italy, an adapter (not included) must be used

between the power cord and the outlet. Important: The tread-

mill is not compatible with GFCI-equipped outlets.

Use only a power cord type H05VV-F with a conductor of at

least 1mm

, with a country recognised plug and an appliance

coupler.

DANGER: Improper connection of the

equipment-earthing conductor can result in an in-

creased risk of electric shock. Check with a qualified

electrician or serviceman if you are in doubt as to

whether the product is properly earthed. Do not mod-

ify the plug provided with the product—if it will not fit

the outlet, have a proper outlet installed by a qualified

electrician.

OPERATION AND ADJUSTMENT

Socket on treadmill

Outlet

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Pro-Form 635 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Laufbänder Pro-Form 635