Pro-Form PFTL81910.0 Bedienungsanleitung PDF herunterladen (Seite 13)

16. Make sure that there is a piece of cardboard

below the rear of the Frame (56).

See page 15 and plug in the power cord. Next,

ee page 17 and turn on the power. The incline

system will automatically calibrate and the

Frame (57) will move up and down. If the in-

cline system does not automatically calibrate,

ee page 26 and manually calibrate the incline

system.

Then, press the Incline increase button once.

When the Frame (56) stops moving, remove the

key from the console and unplug the power

cord.

Cardboard

17. IMPORTANT: Before you begin this step,

make sure that you have calibrated the in-

cline system as described in step 16.

Raise the Frame (56) to the position shown.

Have a second person hold the Frame until

this step is completed.

Orient the Storage Latch (53) so that the large

barrel and the latch knob are oriented as shown.

Attach the upper end of the Storage Latch (53)

to the bracket on the Frame (56) with a 3/8" x

1 3/4" Bolt (6) and a 3/8" Nut (12).

Attach the lower end of the Storage Latch (53) to

the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"

Nut (12). Note: It may be necessary to move the

Frame (56) back and forth to align the Storage

Latch with the Base.

Large

Barrel

Latch

Knob

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Keine Kommentare

Pro-Form PFTL81910.0 Bedienungsanleitung Seite 13