Pro-Form SEARS 831.288300 Bedienungsanleitung PDF herunterladen (Seite 6)

4. Identify the Left Pedal (48) (there is an "L" on the

Left Pedal for identification). Using an adjustable

wrench, tighten the Left Pedal counterclockwise into

the left arm of the Crank (14). Tighten the Right

Pedal (not shown) c/ockwise into the dght arm of the

Crank.

Adjustthe Pedal Strap (30) on the Left Pedal (48) to,

the desired position. Press the Pedal Strap onto the

adjustment _b on the Left Pedal. Adjust the Pedal

Strap on the Right Pedal (not shown) In the same

manner.

5. Remove the four stickers frem the brackets on the

left and dght sides of the Seat Frame (2).

Hold the Left Handlebar (6) inside the left bracket.

Insed the Long Carriage Bolt (13) through the

bracket and the Left Handlebar. Hold the Right

Handlebar (5) inside the dght bracket. Insert the

Long Carriage Bolt through th_ bracket and the

Right Handlebar. Make sure that the Handlebars

are on the correct sides--the ends should bend

outward slightly, Slide the Star Washer (11) onto

the Long Carriage Bolt and tighten the Resistance

Knob (7) onto the Long Carriage Bolt_Make sure

that the head of the Long Carrlege Bolt Is resting

In the square hole in the left brackeL

Note: To attach the Res'_anoe Knob (7) on the left

• side, reverse the p_sitions Of_e Long Carriage Bolt

(13), Star Washer (11), and Resistance Knob.

6. If there Is a rubber b'Zndaround the Console (29),

remove it.

The Console (29) requires two "AA" batteries (not

induded)--alkaline battedes are recommended.•

Open the battery cover on the beck of the Console.

Press two baftedes into the battery dip. Make sure

that the negative (-) ends of the batteries are

touching the springs. Pla-_FtffiTbattery clip in the

Console and close the battery cover.

v 61__cket

Battery

Bafte_

Make sure that all parts are properly tlgh-_ned before.you use the PROFORM • 990S.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Keine Kommentare

Pro-Form SEARS 831.288300 Bedienungsanleitung Seite 6